Saturday, August 18, 2012

Marbled Votives

Because it's only August, I decided to continue improving my friend's gifts.  Part of the 3 step plan.

Can still hear you Jamie
While trying to resist the urge to just pin everything into My House is a Very Very Very Very Fine House board from my design soulmate, I've also been keeping tabs on all the fun things to keep my hands busy. Since the bottom of the smaller votives is flat it's hard to pass up working with such a perfect surface.  *ponders infinite possibilities... codes instead*
The top needed some love too == sparkly band
I found this idea on Curbly for marbling the bottoms of shot glasses and figured that I'd give it a shot for these votives.  The original looks so simple!


Materials
Glass votives with flat bottom (recycled Glade candle holders)
Nail polish/enamel paint; used 3 colors per shot glass
Painters tape
Shallow bowl you don't care about (nail polish goes in, doesn't really come out)
Toothpick
Nail polish remover for touching up the parts of the glass you didn't want decorated
Cotton swabs for the touchup work

Because we're fans of clean lines here we've breaking out the painters tape.  About a half inch down from the top of the votive put a ring of tape around the votive.  Paint with the nail polish of your choice.  Also bottoms up!  (Tape up)

While the blue is an annoying polish color, it makes for great paint.
Alright, the good stuff: the actual marbling.  Fill the bowl with water then drop or pour the nail polish into the bowl.

This alone could have been the bottom of the glass and I'd have loved it.

Then you can swirl it around with the toothpick to your heart's content.  I found that the consistency of nail polish when in water is very different than what you'd think.  If you don't work quickly enough it creates a film over the surface which makes it very difficult to swirl the polish when in the water.  I found it easier to swirl a bit in the water then stamp the glass where I most liked the swirl then use the toothpick for finishing up the work on the bottom of the glass itself.

If you look closely you can see it's an accurate topographic map of my yarn bin
As I'm learning about a lot of crafts, less is more.  Don't marble more than you have to here.  It just turns the whole thing grey.  Which is awesome if that's what you're going for, keep up the good work!  Let dry.

& no, I went and watched an episode of White Collar
After they dry you want to seal them with either clear nail polish or a light, glittery one that matches but won't cover the bottom of the votive.  You know, the ones that are impossible to paint 7 you need about 6 coats to even see the color  This is one of those few situations where I actually went with the glittery option.  Maybe I've been watching too many episodes of Craft Wars....

It's the good kind of sparkly
After everything dries it's time for the reveal!
Reeeeeveal!
 Take off the tape and touch up the lines and if you got a bit overzealous with the application, get it from the middle of the glass too.  I don't judge, I've had to rescue my computer case because I don't ever let my nails sit long enough after I paint them.  My mouse when it was painted was totally intentional.
From the inside lookin out

So much better when it's dry!

I'm jealous of this one myself
We're already doing better than last year picture-wise
 Next, part 3!  To make the candles!  Because we're still in August! *victory fist pump*


</sidebar>

Sunday, August 5, 2012

Recycling Glass Votives

I woke up the other day and thought: "omg!  It's August!  There's only 4 more months till Christmas!"

Yes Jamie, I hear you
So in order to avoid the Search for Red (yarn/clay/paint) October I've efficiently decided to start a bit early this year.  & since it's Augus I can safely make extravagant claims of what I'm going to do.  It's stretch goals for crafting.  New planning technique, oh yeah.

For this Christmas I'm not even going to try to outdo what I did last year for a couple of my friends.  I made them "Wine Emergency" Kits which I'm so sad I didn't take better pictures of because they were awesome.  Which should be apparent from the name; it's associated with wine.  And included emergency chocolate.  How much better can it get?

One of the 2 pictures of the wine emergency kit in existence.  I beaded the fork; it took ages
A lot better than that picture.

I'm a sucker for maximizing anything I buy.  Through the coupon-enabled purchase through the final intended use of the product to the "...I don't want to really throw it away..."  So when my candles look like sad versions of their former selves:

When burnout is a good thing
I recycle them!

Aunt's gift; check
Man, it feels so good to reuse things.  Makes me able to justify my almost borderline pyro habits when it comes to candles.  The other good part about reusing the glass votives is it's like you're almost cheating; you're getting a free (ok "free") medium on which to try techniques.  So the crackle nail polish does not crackle on glass?  *shrug*   The etching mask slipped a bit?  Looks like I now have a candle for my bathroom were it can hide and you get take 2.

Oh hey!
 The possibilities are endless. Endless until the you realize that you're only 1/8 way through burning the next candle.

Faster!  You're fire!  BURN!
Until then, here are some ways you can keep busy while the candle is burning the 3:30 (you can choose am or pm) oil.  To get the votives ready for crafting use you've got to get the left over wax out.  There a couple different techniques but the one that makes the most sense to me is to melt it out.  I mean you could scrape it if you have patience but I don't think it's worth it.  Turn on the oven to 200.   Line a baking dish with tin foil making a "bowl" or essentially covering the bottom & working up the sides slightly to create a lip.

Make sure to turn up the edges.  We're going for bowl
Place the votives upside down in the tray and put it in the oven.  Let it sit for about 10 minutes.  You can check it at intervals; the important thing we're looking for is all the wax to be out of the votives.

This is an example of it NOT being ready.
 Bonus points for getting the wick out.  The wick is held in place with some industrial strength glue, and if you leave the votives in the oven long enough, the heat will make the glue melt.  Sometimes all you have to do is wiggle it when heated and it comes off too.

This is an example of it ready
Quick! Before the wax solidifies!  We've got 2 things to do!  1) wipe out all the wax from the votives so it doesn't solidify in a thin layer around the inside of the inside.  It's very very hot, use a potholder

Burn wax, not your fingers.
2) we've now got a tin foil boat of hot wax. Now can we use this wonderful repository of raw materials?  Why yes, we can.  Since we're currently not melting new wax for candles we're going to make fire starters!  Take cotton pads and submerge them into the melted wax. You want to gather as much of the wax as you can, so just keep dropping them in until the wax is pretty much used up.

The freshest smelling campfire you'll ever have.
Now we have it: it's (mostly) clean glass.  & it only took 20 hours and 10 minutes.  Totally worth it.

Now to decorate!  Because I had 2 different types of glasses, I decided to use 2 different techniques and continue my quest to etch everything glass I can get my hands on.  I used a dragonfly stencil on the larger votives (courtesy of Febreeze) and the names of my friends on the smaller ones (courtesy of Glade)

FYI: It's really hard to take pictures of etching
I can see you guys wondering if this is how I'm leaving them.  To that I chuckle a bit and reassure you that I'm not giving up on such an easy point in the crafting process.  Me?  Keep it easy?  *waves hand*  It's only August!

</sidebar>

Sunday, July 29, 2012

Steelers String Art

I don't think crafting can really be complete until you spend time working with handtools.  While dremmels are pretty much the most awesome tool to be introduced to the home crafting environment there are also other other valid tools.  Hammers, screwdrivers, chisels, dremmels... the list is endless

& every one of those attachments is necessary
 & yeah, this is why the dremmel is awesome

Every comp sci gal needs a purse of floppies

The tool of choice for this project was a hammer.  The original goal of this was to use up supplies I already owned.   The only supply I ended up already having was the string.  Whoops... On a positive note I got to find a new art store while trying to find board to nail into.  (http://www.jerrysartarama.com/)

Shown: work of a not so starving programmer
 After totally posing as an art student doing "mixed media" I came out with the extra supplies I needed.  Hey, it included string, nails, and paint.  That's 2 more medias than most art.  And I got to shop for craft supplies at Lowes.  That in and of itself the coolest part of this project.


Supplies:
Paint - acrylic, black
Nails - Wire Nails (flat top) 5/8 x 18
String - Crochet threads (grey, yellow, red, blue)
Hammer - I used a huge one, I'd try to use smaller mallets so you can navigate into tighter spaces
Board - 8"x8" Wood board
Steelers Logo
Tweezers - optional

Paint the entire board black.  Yes, this includes the edges.  Because if I've learned anything it's that the edges matter.  Paint the top and top part of the sides first then after that dries paint the bottom of the sides.  I did two coats of paint on the top because it was really important to me to have a consistent color.

The perfectionist came out when I was all about getting that top as crisp as possible.

Place the logo on the board to get an idea of where you want to place it.  I printed out a picture that I found online because luckily there aren't that many variations on the Steelers logo & it's simple.  But as soon as I try frehanding those circles it'll be all over.

Yeah, see that'd never happen in the wild.
After laying down the logo, the fun part starts.  Start making marks on the logo randomly spaced along the outline of logo.  We want to keep the logo interesting by having the marks not directly lined up because otherwise we'll end up with a really boring line pattern where everything just crosses at the same points.  I ended up generally putting 8 nails along each quarter of the inside circle and 9 along the outside.  And for the stars I marked each point, the mid section of each arc and used 3 nails evenly spaced in between the midpoint of the side and the tip of the star.

It's like playing the game where you jump pegs over each other!
Important!  We are just making small marks, not fully hammering it in.  Unless you want the logo on top which is cool I guess.  Totally makes the black paint worthless though.  & you'd probably want to decopauge it first. Variation A.  Anyway, after you're done poking holes it should like vaguely like this.

Yeah, don't know what's going on there
Now that we have beautiful pattern of holes, it's time to actually put the nails in.  Hammer the nails firmly into the board.  You don't need to attack it, just make sure you can't pull them out with pressure.  The smaller hammer is perfect for these corners & tight edges.  If you have big fingers like I do, try the nail with the tweezers.  Keep the nails as straight as possible.

Steady, steady
After you have the all the nails in place you can start running the string.  Or if you're tired you can just leave it like this.  Variation B.

What a stud
Create a slip knot and loop around a nail.  Not sure how to tie a slip knot? Here's a refresher.  Wrap around the outside edge of the circle and then the zig zag across the nails.

The edges and the zig zag

I've never been good at random patterns.  It's ok, if you're not either.  Luckily the way the string is woven along the nails doesn't really matter.  The only thing that matters is there are no significant gaps.  And keep the lines interesting by avoiding crossing the same path twice.  It's not scientific unless you're talking about the random properties of quarks.  Then you're either really at the right place (crafting + geek!) or the wrong one (I honestly don't even know where to send you... try Bill Nye?)

Bill! Bill! Bill! Bill! Bill! Bill! Bill!
Continue with the other colors.  With the stars, put the first loop in the center point where they all meet do the outline first and then try to hit every nail at least 1 time except the tips.  We want to keep them pointy so tracing around the outline is good enough.  To end, cut the string,  tie a slip knot, and loop around the nails until you run out without any significant slack.  You've got tons of options and don't go about cutting the string until you're happy with the coverage of the areas.

Does not produce music
Use the tweezers to put the loop over one of the nails.

Blur however does
Aaaaand continue until you've got all the stars done.  And you come out with something that would fit pretty well with the game room to remind your fellow pool players that they're behind the Steel Curtain




</sidebar>

Thursday, July 19, 2012

Combine Ranges of Integers

At one point in an application I needed to be able to combine a range of numbers into a comma-delimited string of ints with the fun added twist of combining all sequential ints together into a range.  Stupid exact matching tool spec.... So instead of writing a new tool to do the same validation check (because I'm crazy but also the other *azy: lazy) I wrote a method to create the combined ranges.

This is in Groovy and quite frankly may be able to be more efficient, but this is what I pounded out that's quick to solve this problem.  Improve if you want!


If you find improvements, feel free to post, all I ask is to please make sure you've tested your code before posting.  Nothing is sadder than getting someone's code from online and then having to debug.  Though it's the easiest thing to blame in your work ;)

</sidebar>


Monday, July 16, 2012

Crayon Art as all the cool kids are doing it

There have been a lot of pictures of melted crayons on canvas floating around Pinterest lately or not so lately I can never tell because when you're on there, time is kinda distorted.  I've seen things that I shouldn't have seen namely the bottom of the continuous line of pins.  On the front "everything" page.

<picture/>
No one should see that.  I had to go sit outside for 15 minutes to counterbalance.

The thing I've noticed that there are very few examples of how to do it.  Because as it turns out it's a bit harder to actually harder to melt wax than you'd think.  Yeah.  I'm demoting my crafting abilities for that one.  I got a huge donation of used crayons (thank you used school supplies) to dig into.  64 super box of crayons with included crayon sharpener!  With special kid created colors.  For the folks at home they were neon.

I keep a clean workbench ;)  It's actually supplies from the sun art I wrote about earlier.  It's blog meta!

My spin on this was separating out the different colors and create a panel of each that I could then use interchangeably in displays.  Since I had 64 different colors to choose from it's not hard to find enough of each to be able to fill a 4"x12" panel.  I decided to go with blue, brown, and green to start because they're colors that can be appreciated anywhere including my bathroom which has the blue/brown/tan/eggshell theme going for it.  Green had the most diverse of the color options in the box.  Turns out blue is really not a diverse color in terms of what I had available in that box.  Red really isn't either because it easily bleeds into orange.  Then you sit there trying to figure out where to draw the line and why "red-orange" looks more orange then red.

The browns were diverse and glorious.

11 crayons fit across the panel and give plenty of room for the wax to run down for effect.  & it doesn't have to run for very long as crayon likes to remain in a solid state perfect for coloring.  I stripped off the wrappers of the crayons and they hold onto canvas with your basic craft glue.

The diversity of the color blue

When doing this craft make sure you're working on a easily cleanable surface.  I laid out a tarp as my carpet had already had the joy of red acrylic paint.  Which can be easily differentiated from the orange paint.

I'm never getting the security deposit back on this place...

I used the low setting on my hairdryer with a "focus cone" for straightening as well as placing direct blasts of hot air to a concentrated band space.  Since the straightening out is of wax from these wonderfully round crayons, I recommend using this attachment if you've got it.  If not, don't sweat it; let the crayons do that in a few minutes.  Crayons run really well, it just has to get started.  Since the makers didn't want it falling apart in kid's hands, you've got to apply the heat relatively close to the crayons to get it started.

Crayola doesn't respect the hula hoop.  Rose Art may fare better

Also since you are blowing hot air at something that melts, you want to make sure that you're forcing it in the right direction.  Disclaimer: I've tried typing out the sentence about angling the dryer down but it just forced too many bad puns that I'm just going to let you assemble your own from the words "down" "blow" "aim" "lightly" and "oscillate".

While I'm all for decorating the borders, the splatter tends to dominate this

 Try to uniformly heat the crayon which is difficult, but after it gets started it's basically a river and your responsibility is to keep it flowing down the canvas.  The important thing is to not keep constant power on the crayons, if you do you end up with more of a running blob rather than streaks.

Checking for evidence of all the colors running.  Blue: check.

This can be a technique if you want it to be and doesn't look all that bad in the end.  I quickly came to realize people keep the wrappers on so the crayons stay separate at the top and look very true to their original form.  *shrug* I didn't want wrappers maring the color pallet.  Actually since the crayons were preused some had already been through the crayon sharpener in the back of the box and the frayed edges would have killed me on the display.  Alternate heat/no heat while evenly applying heat to all the crayons until you're happy with how the bottom 3/4 of the canvas looks.

Kermit was right.  It's tricky getting it to be green

Pro tip: the longer you try to heat the crayons and try to "fix" it, the worse you usually make it.  This whole heating process can take less than 10 minutes because the more you try to apply heat to the already hot crayons the more you're going to end up with more wax which usually just leads to a wax tidal wave running down the front of the panel.

Actually a fun follow up project would be to use the wax drippings from the melting.  Even though you're aiming down, crafting has an ability to get everywhere.  I love how my tarp looks now that I've finished these 3.  Should've done all of these overtop of black canvas for lines and random splatters of wax...  Looks like I'll just have to do some more!

Missed opportunity #1


So short summary:
1) apply heat close to crayons
2) angle down to force blowing the wax down; still cover work area
3) keep heat source moving for even distribution
4) less is more


</sidebar>

Wednesday, July 4, 2012

Simple Salmon Artichoke Mixin

When it comes to planning meals my pantry looks like this:

When coming back from the grocery store and trying to put food away it looks like this:

I don't know where it comes from I swear.  Maybe it has something to do with the 3 different types of flour and the tuna packets deciding it's a good day to multiply, maybe it has something to do with my inability to say no to a deal. (not without coups, baby. not without coups)  So it was time to say no to having to run out to my second most visited store *cough* Kroger *cough* and use what my pantry/fridge/secret hiding space above my fridge (hint: it's where the liquor & chocolate are) produced.


Simple Salmon Artichoke "Mixin" -> stealing straight from Cold Stone on that name because this works best as an addition for whatever pasta/rice/bread product of you choice it.  I had mine with some gnocchi following the theme of how did that sneak in there!?!


1 can salmon
1 tbsp white wine
1 tbsp olive oil
2 tbsp lemon juice
2 tsp Italian herbs, aka parsley, lemon zest, McCormick's special blend
2 artichoke hearts, chopped
2-3 scallions, chopped
1 clove garlic, chopped
1/8 cup parmesan cheese shredded

Open the salmon into a bowl and chop up  Add the rest of the ingredients except the cheese & oil and mix.


The next part I do because I love everything having a warm dinner.  Heat the oil in a sauce pan; add mixture.  Stir for a few minutes until slightly warm.  Fold in cheese.


Mix til the cheese is a bit soft then turn off the heat.  Serve over your choice of pasta!  Easy, quick and helps cut through the endless stock of... seriously?  Peanuts, almonds, walnuts, AND pistachios?  Tune in tomorrow for "simple nut medley"

</sidebar>

Tuesday, June 26, 2012

3d to 2d: capturing shadows with sun art

Sometimes I have a habit of buying crafting supplies without really having a final project in mind.  Or something that  I wasn't expecting shows up in my most recent package from Think Geek.  Woot free </head> glass!  Emergency present stash grows by 1.

Oh hey look, surprise crafting supply!

So I started thinking of things to use it and I've always liked pictures that look like window frames.  So I decided that I'd break my rule of no flowers to go "in" the divided canvass.  & then I found this:

  
Boom.  Lightshot.

So after reading the ridiculously long description of what the artist did in order to get this picture (seriously, photographing insect wings?) I decided to skip the wings and just use the tape.  Because who has that type of time?

Boom. Lightshot take 2.

Yeah.  Cool stuff.  The canvasses I used had a redic high border and I decided to add an edge border of another set of shadows and cutting them into strips and decoupaging them along the edges.

Boom.  Pretty edges.


So I decided to share the directions on my favorite crafting site Instructables!  If you'd like the full instructions along with other wonderful pictures, here's a link:
Capturing Translucent Shadows

</sidebar>